Ubuntu One Sync & 5GB storage free - Please and thank you using Fedora 16!!
Install the following:
sudo yum install imake python-twisted python-inotify python-oauth protobuf-python gnome-settings-daemon-devel nautilus-devel python-distutils-extra protobuf protobuf-compiler PyQt4 PyQt4-devel wget
Get the following packages:
wget http://launchpad.net/ubuntuone-client/trunk/2.0.0/+download/ubuntuone-client-2.0.0.tar.gz
wget http://launchpad.net/ubuntuone-storage-protocol/trunk/2.0.0/+download/ubuntuone-storage-protocol-2.0.0.tar.gz
wget http://launchpad.net/ubuntuone-client-gnome/trunk/2.0.0/+download/ubuntuone-client-gnome-2.0.0.tar.gz
wget http://launchpad.net/configglue/trunk/1.0/+download/configglue-1.0.tar.gz
wget http://launchpad.net/lazr.restful/trunk/0.19.3/+download/lazr.restful-0.19.3.tar.gz
wget http://launchpad.net/lazr.restfulclient/trunk/0.12.0/+download/lazr.restfulclient-0.12.0.tar.gz
wget http://launchpad.net/lazr.uri/trunk/1.0.2/+download/lazr.uri-1.0.2.tar.gz
wget http://launchpad.net/ubuntu-sso-client/trunk/1.3.3/+download/ubuntu-sso-client-1.3.3.tar.gz
tar -xzvf configglue-1.0.tar.gz; tar -xzvf lazr.restful-0.19.3.tar.gz; tar -xzvf lazr.restfulclient-0.12.0.tar.gz; tar -xzvf lazr.uri-1.0.2.tar.gz; tar -xzvf ubuntuone-client-2.0.0.tar.gz; tar -xzvf ubuntuone-client-gnome-2.0.0.tar.gz; tar -xzvf ubuntuone-storage-protocol-2.0.0.tar.gz; tar -xzvf ubuntu-sso-client-1.3.3.tar.gz
mkdir ul
mv ubuntuone-storage-protocol-2.0.0 ul/protocol
mv ubuntuone-client-2.0.0 ul/client
mv configglue-1.0 ul/configglue
mv lazr.restful-0.19.3 ul/lazr.restful
mv lazr.restfulclient-0.12.0 ul/lazr.restfulclient
mv lazr.uri-1.0.2 ul/lazr.uri
mv ubuntu-sso-client-1.3.3 ul/sso
ls ul
cd ul && cd lazr.restful
python setup.py build
sudo python setup.py install --prefix=/usr
cd .. && cd lazr.restfulclient
python setup.py build
sudo python setup.py install --prefix=/usr
cd .. && cd lazr.uri
python setup.py build
sudo python setup.py install --prefix=/usr
cd .. && cd configglue
python setup.py build
sudo python setup.py install --prefix=/usr
cd .. && cd sso
python setup.py build
sudo python setup.py install --prefix=/usr
cd .. && cd protocol
python setup.py build
sudo python setup.py install --prefix=/usr
cd .. && cd client
./configure --with-protocol=../protocol --with-sso=../sso --prefix=/usr --sysconfdir=/etc
make
sudo make install
cd ..
sudo mkdir /etc/xdg/ubuntuone
sudo cp client/data/syncdaemon.conf /etc/xdg/ubuntuone
Other Commands:
/usr/lib/ubuntu-sso-client/ubuntu-sso-login &&
/usr/libexec/ubuntuone-syncdaemon --debug
u1sdtool -c
u1sdtool --start
u1sdtool --list-folders
u1sdtool --subscribe-folder FOLDERID
u1sdtool --start
References:
http://ceramicm.blogspot.com/2011/08/hello-sailor.html
http://www.linuceum.com/HintsTips/qikUbuntuOneProb.php
Comments
hey, thanks for posting the
Submitted by Anonymous (not verified) on
hey, thanks for posting the howto.
i have some trouble getting straight if the data from
ubuntuone-client-2.0.0
ubuntuone-client-gnome-2.0.0
ubuntu-sso-client-1.3.3
are all supposed to end up in a common directory "sso".
your guide is a bit unclear on that. it writes
"mv ubuntuone- ul/sso"
"mv ubuntu-sso-client-1.3.3 ul/sso"
like that python won't compile...
cheers for your help!
Ubuntu One For Fedora 16 Howto
Submitted by Anonymous (not verified) on
hey, thanks for posting the howto.
i have some trouble getting straight if the data from
ubuntuone-client-2.0.0
ubuntuone-client-gnome-2.0.0
ubuntu-sso-client-1.3.3
are all supposed to end up in a common directory "sso".
your guide is a bit unclear on that. it writes
"mv ubuntuone- ul/sso"
"mv ubuntu-sso-client-1.3.3 ul/sso"
like that python won't compile...
cheers for your help!
Ahh yes that should be fine..
Submitted by admin on
Ahh yes that should be fine.. I forgot to add client there to the first one and so I have updated the doc. You will get the odd error during compile I have found though.
About the odd errors
Submitted by Anonymous (not verified) on
There are two things that I noticed-one that I fixed, and one that I left alone.
your mkdir ul creates a directory with the letters "u" and "l" where the original postings created a letter "u" and the number "1" (easy mistake with crappy fonts on everyone's part). I left that alone, because I'd have to fix it throughout.
As for the odd compile error, this line
mv ubuntuone-client-2.0.0 ul/sso
should be
mv ubuntuone-client-2.0.0 ul/client
If you do it manually, you won't have any errors, but if you copy and paste the entire script, you will. So, what I did was copied up to the sso portion (mv ubuntuone-client-2.0.0 ul/) and pasted that in, and then manually typed in client. Then I copied/pasted the rest of the script, and everything worked.
However, when I run ubuntu-sso-login, it hangs. What information is required there? And how do I get it configured, so it will login to my Ubuntu One account? Along that line, is the Control Panel installed, or just the command line applications?
Thanks, and have a great day:)
Patrick.
The login took awhile the
Submitted by admin on
The login took awhile the first time I used it. I found that all it did was run a user account config.
Thanks for the error catching :) Feel free to contact me if you have any troubles or want to see something else on my blog.
error
Submitted by Anonymous (not verified) on
Hi:
In this point: python setup.py build
byte-compiling build/bdist.linux-x86_64/egg/lazr/restful/error.py to error.pyc
byte-compiling build/bdist.linux-x86_64/egg/lazr/restful/docs/__init__.py to __init__.pyc
creating build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/namespace_packages.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/not-zip-safe -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/requires.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
copying src/lazr.restful.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO
creating 'dist/lazr.restful-0.19.3-py2.7.egg' and adding 'build/bdist.linux-x86_64/egg' to it
removing 'build/bdist.linux-x86_64/egg' (and everything under it)
Processing lazr.restful-0.19.3-py2.7.egg
removing '/usr/lib/python2.7/site-packages/lazr.restful-0.19.3-py2.7.egg' (and everything under it)
creating /usr/lib/python2.7/site-packages/lazr.restful-0.19.3-py2.7.egg
Extracting lazr.restful-0.19.3-py2.7.egg to /usr/lib/python2.7/site-packages
lazr.restful 0.19.3 is already the active version in easy-install.pth
Installed /usr/lib/python2.7/site-packages/lazr.restful-0.19.3-py2.7.egg
Processing dependencies for lazr.restful==0.19.3
Searching for zope.security
Reading http://pypi.python.org/simple/zope.security/
Reading http://svn.zope.org/zope.security
Best match: zope.security 3.8.3
Downloading http://pypi.python.org/packages/source/z/zope.security/zope.security-3.8...
Processing zope.security-3.8.3.tar.gz
Running zope.security-3.8.3/setup.py -q bdist_egg --dist-dir /tmp/easy_install-tDkukt/zope.security-3.8.3/egg-dist-tmp-RibKAL
unable to execute gcc: No such file or directory
error: Setup script exited with error: command 'gcc' failed with exit status 1
[root@pablo lazr.restful]#
Thanks!
GCC
Submitted by admin on
This would probably mean that either your user does not have enough permissions to execute gcc OR the more likely that it needs to be installed.
Cheers!
Add new comment